Skate Deterrants

Pathfinder Skate Deterrents are a low cost and effective means of deterring skate boarders etc from using public places. The profile is designed not to create a trip hazard for the general public but to stop the speed of travel that the skate boarder / roller blader needs in an effort to jump off or onto steps / walls, or any other building which causes damage or danger to the pedestrian public.

The secret is to design the correct lay-out for affected areas and a Pathfinder consultant can help you.

Specifications

dimensions

Length: 595mm x Width: 20mm x Height: 5mm

composition

Made from state of the art thermo plastic polyurethane, providing excellent slip resistance, superb abrasion resistance and UV stability.

types

Semi round profile on bladed shaft.

slip resistance

Pathfinder Skate Deterrents provide excellent slip resistance and have been tested to AS/NZS 4586:1999 by the CSIRO, test number 2466-UBs achieving an R10 rating.

chemical resistance

Pathfinder Skate Deterrents are resistant to most common acids, alkalis, oils and greases.

installation

Must be in accordance with PFSA installation instructions. Pathfinder Skate Deterrents are suitable for internal and external applications.

australian standards

Pathfinder Skate Deterrents have an R10 slip resistance classification of new pedestrian surface materials as AS/NZS 4586:1999 Appendix D: oil/wet ramp test.

warranty

PFSA warrants all their products within the terms of PFSA standard warranty, against specific suitable installations when installed correctly as per PFSA installation procedure.

Consult your distributor / installer for any specific test reports if required.