Tactile Indicators – Stainless Steel - Hazard

Tactile Indicators – stainless steel, brought to you by Pathfinder Systems Australia are an ideal ground surface indicator.

The following profiles are available in Solid 316 Marine Grade Stainless Steel, Hazard:

The above products are also available using Epoxy Adhesive Fitting.

The Tactile Ground Surface Indicators (TGSIs)

Are an innovated solution for all substrates including concrete, asphalt, tiles, pavers, terrazzo, wood, carpet and vinyl
Conform to AS1428.4.1.2009 AS/NZ Standards
Easily installed with little down time required – immediately available to walk on when using the fixing plug option
Are very hard wearing and durable
Available in Solid 316 Marine Grade stainless steel

Overview

Pathfinder Polyurethane Tactile Indicators have been designed for safety, dignity and independence and are an innovative tactile solution
Suitable for internal and external use
Tactile Indicators are very discreet
Available in Solid 316 Marine Grade stainless steel
Single Stainless Bar 300mm long on 4 x 20mm shafts with fixing plugs
Products are manufactured to be fully compliant to the relevant Standards covering Tactile Ground Surface Indicators (TGSIs), 1428.4
Products are tested through an accredited body to confirm compliance
Warranty is provided for both product and installation (through an accredited installer)

Manufactured to meet AS/NZ Standards 1428.4.1.2009
Aesthetically pleasing
Can be installed on most substrates including concrete, asphalt, tiles, pavers, terrazzo, wood, carpet and vinyl
Slip resistant as required by AS/NZ 4586
Extremely hard wearing and durable
Suitable for internal and external use
Easy to install
Extremely hard to accidentally remove
Proven use in harsh Australian conditions
Will not crack, fracture or chip with substrate movement

Available in a variety of colours all tested within CSIRO slip test results.